Arm3e Series Electronic Molded Case Circuit Breaker Arm3e-125-3300 MCCB 3p 125AMP Molded Case Circuit Breaker

• Customization: Available
• Breaking Capacity: Low Voltage Circuit Breakers
• Operation: Electric Type
• Model NO.: Arm3e-125-3300
• Speed: Normal Type Circuit Breaker
• Arc-extinguishing Medium: Air
• Structure: MCCB
• Poles Number: 3
• Type: Circuit Breaker
• Function: Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection), RCCB
• Certification: ISO9001-2000, CCC
• Transport Package: Carton
• Specification: 150*92*92
• Trademark: AceRreare/OEM/ODM
• Origin: China
• HS Code: 853620
• Production Capacity: 500

Product Description

Product Description

1. Ambient air temperature of -5 °C to +40 °C.

2. The altitude of the installation site does not exceed 2000m.

3.The relative humidity of the air at the installation site shall not exceed 50% at a maximum temperature of +40°C, and may be higher at lower temperatures, e.g. up to 90% at 20°C. Special measures shall be taken for occasional condensation due to temperature changes.

4. Pollution class 3.

5.The circuit breaker can withstand mechanical vibration with a frequency of 2Hz~13.2Hz, displacement of ±1mm and a frequency of 13.2Hz~100Hz and acceleration of ±0.7g by IEC60947-2 test requirements.

6.The installation category of the main circuit of the breaker is three categories, and the installation category of the other auxiliary circuits is two categories

7. The circuit breaker is suitable for electromagnetic environment A.

8. The damp heat belt type (TH type) circuit breaker passes the test requirements of GB/T2423.4, GB/T2423.18 and is resistant to the effects of humid air, salt spray, oil mist and mould.

9. The circuit breaker shall be installed in a place where there is no danger of explosion and no conductive dust, or sufficient corrosion of metal and damage to insulation.

10. The circuit breaker shall be installed in a place free from rain and snow.

11.Storage conditions: the surrounding air temperature is -25ºC ~ +70ºC.

Product Parameters

Basic Info.

Model	Rated current (In)	Poles	Ue	Icu	Ics	Icw	Ui	Uimp	Mechanical Endurance	Electrical safe life	Flashover distance mm)
ARM3E-125M	16A,20A,25A,32A,40A,45A,50A,55A,60A,63A,65A,70A,80A,85A,90A,95A,100A,125A	3P	AC400V	50KA	35KA	3kA/1s	1000V	8KV	8500	1500	≯50
ARM3E-125M	16A,20A,25A,32A,40A,45A,50A,55A,60A,63A,65A,70A,80A,85A,90A,95A,100A,125A	4P	AC400V	50KA	35KA		1000V	8KV	8500	1500	≯50
ARM3E-125H	16A,20A,25A,32A,40A,45A,50A,55A,60A,63A,65A,70A,80A,85A,90A,95A,100A,125A	3P	AC400V	85KA	50KA		1000V	8KV	8500	1500	≯50
ARM3E-125H	16A,20A,25A,32A,40A,45A,50A,55A,60A,63A,65A,70A,80A,85A,90A,95A,100A,125A	4P	AC400V	85KA	50KA		1000V	8KV	8500	1500	≯50

 

Mode	Rated current (In)	Poles	Structure size	Dimensions (W*L*H1)	Dimensions (W*L*H2)
ARM3E-125M	16A,20A,25A,32A,40A,45A,50A,55A,60A,63A,65A,70A,80A,85A,90A,95A,100A,125A	3P		92*150*110	92*150*92
ARM3E-125M	16A,20A,25A,32A,40A,45A,50A,55A,60A,63A,65A,70A,80A,85A,90A,95A,100A,125A	4P		122*150*110	122*150*92
ARM3E-125H	16A,20A,25A,32A,40A,45A,50A,55A,60A,63A,65A,70A,80A,85A,90A,95A,100A,125A	3P		92*150*110	92*150*92
ARM3E-125H	16A,20A,25A,32A,40A,45A,50A,55A,60A,63A,65A,70A,80A,85A,90A,95A,100A,125A	4P		122*150*110	122*150*92

Detailed Photos

^{Product Overview}

1. ARM3E series moulded case circuit breakers include thermal magnetic type, electronic type and leakage type circuit breakers, they have reinforced BMC base, BMC middle cover and nylon upper cover.

 

 

2. ARM3E highlights

The circuit breaker has overload, short circuit and undervoltage protection functions, and can protect lines and power equipment from damage.

1. According to the rated ultimate short-circuit breaking capacity, the circuit breakers are classified into four types: C (economic type), L (standard type), M (medium breaking type) and H (high breaking type). 

2. ARXM3E accessories are modularized, safe and reliable, with small volume, high breaking capacity, short flashover, high vibration resistance, etc.

3. The circuit breaker has passed the test requirements of GB/T2423.10 and GB/T2423.18, and can withstand the influence of humid air, salt mist, oil mist and mold

4. The neutral pole type of ARXM3-125~630 is A/B circuit breaker when it is of 4 poles specification, which can have a unique function of "overload alarm without tripping" to ensure the continuity of power supply and meet the requirements of Article 6.3.6 of GB50054.

5. It is required to withstand mechanical vibration with frequency of 2Hz~13.2Hz, displacement of ± 1mm, frequency of 13.2Hz~100Hz and acceleration of ± 0.7g;

 

 

3. Material advantages of ARM3E products

One of the material advantages of ARM3E products ---- heat shrinkable insulating materials

The nylon materials such as the upper cover of ARM3E are halogen-free VO flame retardant, high and low temperature resistant, aging resistant high-quality plastics, brand: reinforced flame retardant nylon PA66.

The products have longer electrical life and strength, better appearance and higher breaking capacity.

Engineering plastics are resistant to high and low temperatures, ultraviolet rays, aging resistance, good insulation strength, and good dimensional stability of parts to ensure that the product does not degrade performance in complex working environments;

 

The second material advantage of ARM3E product---- alloy contact with high silver content: the silver content can reach 95%

1,High silver content, high conductivity, thermal conductivity, arc resistance, electric wear resistance,

2,Preparation of dynamic and static contact material standards and reliable process guarantee, improving the electrical life of circuit breaker by 50%.

 

The third material advantage of ARM3E product ---- mechanism:

High quality high carbon steel materials, iron base materials of main iron parts (cold rolled steel 10 # steel) , all adopt  A+ materials.

High quality low carbon cold rolled steel is used, and after QPQ salt bath composite treatment, the wear resistance, corrosion resistance and fatigue resistance of metal surface are greatly improved, and the strength, mechanical life and electrical life of parts are improved by more than 10%.

Surface treatment and processing technology of mechanism parts: QPQ heat treatment technology imported from Germany.

 

1. We selected the operating mechanism (steel) of AceReare Electric and another brand sample to compare the experimental results

The operating mechanism of AceReare Electric has a hardness of 366.1, while the hardness of the other brand is only 252.6, which cannot even reach our lowest value.  

The mechanical life and electrical life are very important indicators in the national standard of the circuit breaker, and our circuit breaker operating mechanism needs to reach a certain strength and hardness, so that the circuit breaker will not damage the service life of the circuit breaker in the opening and closing process, while the hardness of the other brand is far lower than the national standard.

 

 

2. Carburizing test

Surface treatment process, it tests dense compound layer which enhances smoke and abrasion resistance. 

Obvious compound layer was detected from the sample of AceReare Electric, while the other brand showed no data.

 

 

The fourth material advantage of ARM3E products - thermosetting insulating materials

The unique formula material is adopted, which has high strength, good arc resistance, strong insulation, high temperature resistance and good flame retardancy.

 

The fifth material advantage of ARM3E product ---- high sensitivity temperature sensor

High quality bimetallic element materials are used, and there is no need to reduce the capacity from -5ºC to 55ºC.

 

The sixth material advantage of ARM3E products ---- spring materials with longer temperature resistance and fatigue resistance (50% longer than ordinary springs)

 

 

4. Product structure of ARM3E thermomagnetic circuit breaker

Safety, it can directly disassemble the upper cover of ARM3E to install internal accessories.

Accessory installation features: humanized design, making installation and replacement more convenient for on-site installation.

 

 

5. Usage scenarios of ARM3E moulded case circuit breaker

 

 

 

 

Packaging & Shipping

Outer packaging information (dimensions Weight)

Model number	Minimum order quantity	Product size mm (L*W*H)	Weight	Packing metho (wooden box/carton)	Number of boxes	Inner box size cm (L*W*H)	Outer box size cm (L*W*H)	Box weight (g)
ARM3E-125M-3300	50	150*92*92		Cardboard boxe	16	17*11*12.5	46cm*26.5cm*35cm	2750

 

Accessories and Accessories

FAQ

1.Q: Are you trading company or manufacturer ?

   A: We are manufacturer and specializing in manufacturing good quality of MCCB.

2.Q: How long is your delivery time?
   A: Normally 5-10 days if there are goods in stock. Or it will take 15-20 days. For customized   items, the delivery time depends.

3.Q: What is your terms of payment ?
   A: 30% T/T in advance ,and the balance before shipment.
 
4.Q : Can you make customized products or packing?
   A: Yes.We can offer customized products and packing ways can be made according to customer's requirement.

5.Q: Can you offer mould making services?
A: We have made many mould for different customers for years.Wecan offer DMC Thermosetting Compressionmoulding,Thermoplastic injection moulding,Metal stamping moulding.

6.Q: How about the guarantee period?
A: It varies according the different kinds of product. We can negotiate it before place an order.

7.Q: What is your production capacity?
   A: We can produce 3000  sets per month.

8.Q: How about the scale of your factory?
   A: Our total area is 7000 square meter. We have 300staffs, .40 engineers.
9.Q: What tests do you have to confirm the quality of the arc chamber?
   A: We have a incoming inspection for the raw material and process inspection for the rivet and stamping. There is also final statistical audit which consisting the measurement of sizes, tensile test and coat examine.

10.Q: What are the countries you have exported to?
A: We have not worked directly with foreign customers before, we provide ODM and OEM services for brands in China and then they take our products and sell them to foreign customers, basically to Europe and the Middle East.
11,Q: Your products are really good, but we have seen the same circuit breakers on the market nearby and their prices are much cheaper than yours.
A: First of all, I would like to emphasise that the price is definitely proportional to the quality. If you are a buyer, you must know that the materials and treatment processes used in our products are better than those of our peers, and the quality is recognised in the same industry. Our factory has a thermosetting workshop, thermoplastic workshop, welding workshop, hardware stamping workshop and assembly workshop, and the rate of self-made parts is as high as 80%. We have also built a new factory in Wuhu to guarantee the supply of parts for us, so that the parameters and various technical indicators such as mechanical life, Icu, Ics, etc. are very stable, and the match between parts is very high, and the service life of the finished product is also very long, which is They can be used in high-end industrial areas and hospitals, where the quality of the circuit breakers is very high. We also have our own technology patents and a very professional R&D team of 30-40 engineers to respond to the various needs of our customers, the development cycle of new products only takes 30-40 days, in the process, unconditionally provide you with technical expenses, we can greatly reduce the cost of communication and research and development costs. if particularly urgent, I can apply to my superiors to set up a customer line for you, specifically for you to assemble MCCB.